Aluminum tank for dense fluid materials

Ideal for ceramic materials.
Compatible only with Delta WASP 40100 Clay.


Ceramic Tank

-Tank in certified aluminum up to 40 bar;

– Safety valve set at 7 bar;

The tanks have been updated and have a square section. They will be delivered with support for both round and square section tanks.

– Carefully read the label on the tank and the MANUAL;

-Be sure, before putting into pressure, that the 2 caps of the tank are screwed completely until the filler thread is completely covered;

-Check periodically that the threads of the caps and the tank are not worn or have dents -Always clean the filler and cap threads so as to avoid the closure of incorrect plugs;

– Periodically put grease on the threads of the caps and the tank.

Tank Clay 5L


    We will always deliver a quality and cost effective service, so let us create your poducts as you imagined them, call the CAD design, 3D printing specialist and DeltaWASP 3D printer and consumables supplier in Queensland call us now on 0433 194 371 or email us at

    RCD3D is a pink ribbon member supporting the cause for a cure for breast cancer